You can safely use our stickers on Qurum helmets, such as Baby Band, Eyemet Neo, and Star Band 3D, which have uneven surfaces.
List of helmets that can be used
However, there are some precautions to take when handling it.
Please check it carefully before placing your order.
[How to order]
Please check the box on each sticker product page.
If you check this box,
1️⃣Made with strong adhesive stickers suitable for uneven helmets
Depending on the design, the color may differ from the sample image, so please read the description on each product page carefully.
2️⃣Transfer stickers will be sent separately
If you use a transfer sticker that can be attached while keeping the position fixed, it will be difficult to attach it to the Krum, so we will send it separately. (Excluding name stickers and small stickers that require a transfer sticker)
If you use a transfer sticker, please use it appropriately while referring to the instructions below.

[How to apply the sticker]
-
When applying, apply the sticker with a hair dryer using hot air while filling in any uneven areas with a cotton swab, etc. After application, cool with cold air to allow the sticker to set.
If you apply the sticker as is, the edges of the sticker will come off in the uneven areas.
The sticker will become soft when heated, so use a hair dryer and press it down with a cotton swab or similar to apply it along the bumps.
We recommend using thin cotton buds, such as baby cotton swabs.
The Qurum helmet can be used with hot and cold air from a hair dryer.
Hot air is not recommended, so use warm but not too hot air. The sticker will soften quickly if you run it over a hair dryer for a second or two.
-
If you use a transfer sticker, make sure to transfer it firmly so that no sticker remains on the film, and after removing the film, use a hair dryer as above to fill in the area . It may be a little difficult to apply, but be patient and press it down with a cotton swab.
-
For designs that are made up of small stickers or have corners, a separate protective sticker may be required.
Although the stickers are made with strong adhesive, they are uneven, so small stickers or stickers with fine details may not adhere well. However, if you put a clear protective sticker on top, they will stick firmly!
We have protective stickers available for each design, so we recommend using them if you are unsure.
Order a protective sticker
[Other points to note]
Please check the above instructions before pasting.
-Because it has uneven surfaces, it is less durable than if it were attached to a flat surface.
・The area where the sticker is applied may become less breathable. If this causes skin problems such as eczema, please refrain from using the sticker. We are not responsible for any skin problems caused by applying the sticker.
If the sticker comes off due to unevenness, please use a hair dryer to reattach it or replace it with a new one.
・The sticker material for the premium color is harder, so if you have an uneven helmet, the sticker may not stick easily even if you use a protective sticker.